OPERATION & CARE

Genuine Pace Window Operation and Care

Operation -
At the conclusion of the installation our dedicated Pace Window and Door installer will show you how to operate your new windows. Please print out these instructions as a reminder, so that you windows will always operate as efficiently as they did on they day they were installed.

To tilt the sashes of a double hung window:
Place the window cam lock(s) in the open position.
Raise the bottom sash approximately 3” above the frame or lower the top sash approximately 3” below the frame.
*You must have the bottom sash tilted in before you can tilt the top sash*
Unlock the tilt latches and pull them toward the window lock(s).
Always support the sashes while cleaning.
Return the sashes to the normal position by holding the tilt latches in and releasing them once the sash is its normal position.

To operate the casement window:
Lift the multipoint locking mechanism into the unlocked position.
Turn the crank handle to open the window.
To clean release the 4 locking tabs at the corners of the screen and remove. Be sure that the window is open to 90 degrees.
After cleaning replace the screen.
To close and lock the window reverse steps 1 and 2.

To operate the slider window:
Place the window cam lock(s) in the open position.
Slide the interior sash approximately 3” in the open position.
Unlock the tilt latches and pull them toward the window lock(s).
Pull the interior sash toward you.
Repeat procedures 2-4 for exterior sash.
Always support the sashes while cleaning.
Return the sashes to the normal position by holding the tilt latches in and releasing them once the sash is its normal position.

To operate the awning window:
Lift the multipoint locking mechanism into the unlocked position.
Turn the crank handle to open the window.
To close and lock the window reverse steps 1 and 2.
If you need any further instruction please contact us and we would love to walk you through the steps.

Cleaning & Care -
Pace windows are designed to be thermally efficient, aesthetically pleasing and virtually maintenance free. To maintain that original beauty you may use a mild household detergent to clean the vinyl, and a standard glass cleaner with a lint free cloth to clean the glass.

We actually suggest using our Original Glass Cleaner recipe Ingredients:

1 cup rubbing alcohol

1 cup water

1 tablespoon vinegar

for the most spectacular shine.